How to put away a large warehouse tent?

1. How to put away the automatic warehouse tent.

(1) Put both hands on the pan head of the tent pole, the two supporting rods, and exert themselves to the middle to pull the two tent poles tight. (2) Gently use both hands to press down the disc. It should be noted here that when storing, it is best to open the door on one side to exhaust the air inside.

(3) Fold the four corners of the tent in turn. When you fold the pole, pull it outward and then fold it. Note: Since the joint is locked, it is easy to damage the tie rod if it is hard folded.

(4) Fold the four corners, lay them flat on the ground, roll up the book with the trend, and its volume is consistent with the size of the outsourcing, and then tie the rope. Remember to take your time so that the gas inside the tent can be completely drained. Then put it in a storage bag. Why use a roll instead of a fold? Because folding can cause serious damage to the coating, it is recommended to use a roll, do not forcefully fold the warehouse tent.

2. How to put away the folding warehouse tent.

(1) First check whether the four corners of the folding warehouse tent bracket are abnormal. There are four spring buttons at the injection Angle, and the spring buckle of the tent should be fastened in the eye of the square tube, which can move up and down.

(2) The spring buckle is loosened from the square hole. The spring buckles at all four corners are loose. Get everything out of the folding warehouse tent.

(3) Two people stand opposite each other, each holding the two supports of the folded warehouse tent with both hands. It should be noted that two people should stand on the longitudinal fold of the canopy support to ensure that the top can be folded up when forced.

(4) Two people together push the bracket towards each other so that the top cover can be folded.

(5) When folded to 70%, the folded warehouse tent can be placed flat on the ground. Be careful with the cleaning of the floor and do not stain the warehouse tent.

(6) Remove the corners of the tarp. The corners are placed on the four corners of the canopy, fitted with magic, and can be uncovered by Velcro. (7) Take out the canopy support, put away the four foot supports, and push the inner tube to insert.